How to solve the excessive temperature rise in the use of AC geared motor2021-04-21 15:34:05   |  How to solve the excessive temperature rise in the use of AC geared motor
Once the motor fails during use, it cannot be used normally. Therefore, when analyzing the use of AC geared motor products, if the temperature rise is too high, it is indeed critical to adopt appropriate solutions at this time. When some internal problems have been handled well, the results in all aspects will be ideal.
When the AC geared motor is specifically used, if there is an overload problem during the use of the motor product, the temperature will rise at this time. Also, it should be clear whether the motor is in a phase-loss operation. Only when a good operating condition is maintained, the various results obtained will be very satisfactory.
It should also be understood that various problems such as incorrect motor connection, stator and rotor friction, poor ventilation, etc., will cause temperature rise. After the different problems are found, the corresponding solutions will be given, so that the problem of motor faults can also be solved well.
Therefore, when the AC geared motor is used, you can observe the situation of the motor product in time and give a better answer based on some basic performance content, so that the result will be very satisfactory. At the same time, it should be noted that the specific problems in the use of the product need to be analyzed in detail, and the results of the use will be satisfied.