What is the possible cause of the overheating of the AC geared motor bearing2021-04-22 11:46:12   |  What is the possible cause of the overheating of the AC geared motor bearing
When the AC geared motor is working, if the bearing overheating occurs, it cannot be used continuously, because if it is used continuously, the dangers of various parts are often very great. At this time, the motor should be stopped and continue to work. Through careful inspection, find the reason and give the corresponding solution.
When the temperature of the bearing of the AC geared motor is overheated, the bearing may have been damaged at this time, and it is only necessary to replace the bearing with a new one. Of course, there may be more grease inside the bearing, or it may be caused by impurities inside. At this time, adjusting the internal situation or replacing the grease becomes a good choice.
It should also be understood that once a problem such as overheating of the product bearing occurs, the bearing and the shaft will be too tightly matched to cause the bearing to heat up. Analyzing the possible causes can be clear. Problems with the end caps on both sides of the motor, too loose or too tight belts can cause such problems.
After finding the cause of the problem, it will be easier to solve it. Therefore, after understanding the problems of AC geared motors in the use process, judge the possible causes based on the symptoms that appear, to quickly solve them, so that the motor can enter the normal working state again.