China gear reducer Suppliers

　　China gear reducer Suppliers - Electronic starter is now commonly referred to as the motor, also known as starter. The starter rotor is driven to rotate by the force rotation of the electrified coil in the magnetic field, and the pinion on the rotor drives the engine flywheel to rotate, so as to drive the crankshaft to rotate and start. New low-cost spark plug and starter with ceramic core base lay the technical foundation for automobile development.

　　China gear reducer Suppliers - The structure of gear motor and gear pump is basically the same, but because the gear motor needs to start with load, and it needs to be able to rotate in the positive and negative directions, so the actual structure of gear motor and gear pump is still different.

　　China gear reducer Suppliers - Because of the poor sealing and low volumetric efficiency of gear motor, the input oil pressure should not be too high, and the torque is generally small, and its speed and torque are pulsating with the gear meshing. Therefore, gear hydraulic motor is usually used in the case of high speed and low torque.

　　The following points should be paid attention to during the use of gear hydraulic motor:

　　(1) China gear reducer Suppliers - The output shaft of gear hydraulic motor and the actuator are installed with elastic coupling, the coaxiality error shall not be greater than 0.01mm if it is greater than 0.1mm, and the coaxiality error of sleeve coupling shall not be greater than 0.05mm.

　　(2) The back pressure of oil drain port of gear hydraulic motor shall not be greater than 0.05Mpa.

　　(3) China gear reducer Suppliers - 46 hydraulic oil or other neutral mineral oil with kinematic viscosity is recommended as the working medium of gear hydraulic motor.

       China gear reducer Suppliers - Shanghai Dongzhan Drive Industry Co., Ltd. was established in 2 0 1 1. From the beginning of its establishment, it has been upholding to provide customers with high-quality, reliable and efficient power, transmission and control solutions. The company established its own production base in 2 0 1 4 and currently has more than 80 employees, of whom about 45% are non-frontline operators.